Mopar A body transmission crossmember, 4'' setback for QA1 crossmember with the QA1 engine mounts for the 5.7/6.2/6.2 gen 3 hemi, will not fit stock location mounts with stock K member. Cut out of 3/16 steel.

This crossmember is designed to work with all mopar A body's such as:

'61-62 Lancer

'60-76 Valiant

'63-76 Dart

'64-69 Barracuda

'70-76 Duster

'71-72 Demon

This is also specifically designed to work with the QA1 coilover K-member. This K-member sets the engine back significantly farther in the engine bay (the intake almost touches the firewall). Due to this and the length of the 8hp70/8hp90/ZF8 tranmission it requires an extended rear transmission crossmember. 

This crossmember comes as a 5 piece kit that you can then weld together for a custom fit in your vehicle. 

QTY 2 - Left Mounting ears

QTY 2 - Right mounting ears

QTY 1 - Base crossmember mount

This crossmember mount has three slots cut to fit any GM or Mopar transmission mount (GM 4l80 3 hole mount shown in picture).